Welcome to the home of...

Hood Latch Guard

Jimmi' Jammer®

Home

Hood Guard installation

Contact Us

Gallery of Horrors

Dealers Wanted

Warranty and Disclaimer

Other Products

Jimmi' Jammer®

Gate Keeper®

PunchPlug™

LockCap™

Jimmi' Jammer® Hood Latch Guard

Light Keeper™

Plate Keeper™

Sorry, this product is discontinued due to rising costs and lower demand. This page left for reference.

Consult the chart below. If you don't see your vehicle, email us with your make, model and year and we will look into making one for your vehicle.

Vehicle Description	Buy this Hood Latch Guard
Ford Pickup, F150 and Lincoln Mark LT, all models, including Raptor, 2004 - 2014 AND 2015-2020 models	PN 5471
Ford Pickup, F250/350, and Excursion, all models except those with second radiator in front of hood latch* 1999-2016 AND 2017-22 including Raptor. (*Usually part of a heavy duty towing package, this radiator sits in front of the hood latch, see photo and note below.	PN 5471
Ford Ranger pickup 1996 - 2012. See short video for Ranger application here.	PN 5471
Ford Expedition and Lincoln Navigator, all trim packages, 2003-2017.	PN 5471
Ford E-Series Vans, 2008-2020. E-150, E-250, E-350 etc.	PN 5471

Return to Hood Latch Jimmi' Jammer® product description

State/City	Authorized Hood Latch Jimmi' Jammer® Dealers
Nationwide via Internet	www.trucksecurity.com All models

Check out a typical installation video (about 3 min long.)

Top of page

Ford Application Note

Special Note for all Ford Super Duty owners:

If you have a second heavy duty radiator IN FRONT of the hood latch, our Jimmi' Jammer® Hood Latch Guard will not fit behind the front radiator. Notice in the picture to the right how the top of the radiator is blocking the bottom part of the hood latch. >>

Usually this radiator is added on as part of a heavy duty towing package, but please check your configuration before ordering.

Another possibility is shown in this photo >>

This photo shows a transmission cooler and AC condenser below the hood latch.

The second radiator is behind these.

The Jimmi' Jammer® Hood Latch Guard will fit this configuration.

As long as you have about 1 inch of clearance below the hood latch, the guard will fit.

To see a 3 minute installation video
Click Here

Top of page

State/City	Authorized Hood Latch Jimmi' Jammer® Dealers
Nationwide via Internet	All models of the Hood Guard are discontinued.

Return to Hood Latch Jimmi' Jammer® product description	Return to our Home Page