Welcome to the home of...


Taillight Security Screws

Light Keeper™





Where to buy

Installation & Support

About Us

Latest News

Gallery of Horrors

Contact Us


Jimmi' Jammer®



Gate Keeper®

Plate Keeper™

Hood Latch Jimmi' Jammer™

Top Lite™




Light Keeper™ Installation


Installation of the Light Keeper™ for taillight protection is easy!

Check out the tutorial that follows to see for yourself! If you are installing taillight guard screws on a Jeep Wrangler, click here.

Note: Each Light Keeper™ security kit is sold separately. Each kit will protect a pair of taillights.

Light Keeper™ for taillights tutorial.

1. Locate the factory screws holding your taillights in place. There are usually two screws.

2. Remove the factory screws.
3. Insert the provided security bit into appropriate socket or nut driver.
4. Put a provided flat washer on each screw as needed..



5. Insert a screw into each factory screw hole. Tighten snugly using provided bit, but do not over-tighten as most light assemblies are made of plastic.

6. Store the installation/removal tool in a safe place. You will need it if you ever need to change a bulb on your light.

That's it!

Now your factory or aftermarket taillights are safe from thieves!

Questions? Contact Us

All products Light Keeper home Light Keeper Models

Ready to buy or check prices? Click Here